Onkyo DR-UN7 Instruction Manual page 49

Programming FM/AM Stations & XM Channels One by One – Preset Write
You can store the frequencies of stations one by one manually into the preset memory channels. This is useful
when you want to program the stations in your favorite order.
Display
Turn on the power to the unit before you start the procedure.
1 Tune into the FM/AM station or XM
channel that you want to store a
preset.
2 Press EDIT/NO/CLEAR and turn
MULTI JOG until "Preset Write?"
appears in the display.
3
Press MULTI JOG.
SOURCE
The channel number to be preset flashes.
To cancel presetting, press EDIT/NO/
CLEAR instead.
4
If you wish to change the channel
number, turn MULTI JOG.
SOURCE
Listening to the Radio—Continued
• You can preset up to 30 channels including
both FM and AM stations. For a set in which
XM stations are involved, you can preset up to
40 channels. For example, if you have already
stored FM stations to eight channels, you can
use 32 channels to store preset AM or XM sta-
tions.
2-5
• Programmed FM, AM and XM stations are
indicated separately. Therefore, one of the pre-
2
set FM stations and one of the preset AM sta-
tions could use the same channel number.
• The Preset Write function enables you to store
5
radio station frequencies to any channel num-
ber. For example, you could program three AM
stations to channels 2, 5, and 9.
5
6
Before auto presetting
Press MUTLI JOG to confirm.
If "Complete" appears
The radio station is registered to the pre-
set channel.
If "Overwrite?" appears
The channel you've selected is registered
already.
• To register the new radio station by
deleting the existing radio station
Press YES/MODE.
• To cancel presetting
Press EDIT/NO/CLEAR.
If "Memory Full" appears
The FM/AM stations have already been
programmed into all 30 channels. Delete
unnecessary stations (page 53) and try
again.
Repeat steps 2 to 5 to preset the next
channel.
49