Connecting External Control Devices; Ir In Port - Onkyo TX-RZ50 Instruction Manual

Connections

Connecting External Control Devices

IR IN port

When connecting a remote control receiver unit consisting of an IR Receiver,
etc. to this unit, operation using the remote controller is possible even if the
remote control signal is difficult to reach (due to installation in the cabinet,
etc.). You can also operate the unit using the remote controller from a separate
room such as ZONE 2. For installing a remote control receiver unit, contact the
specialized stores.
• For the type of cable required for connection, refer to the operation manual,
etc. of the remote control receiver unit.
IR Receiver
75