Customizing The Source Names - Onkyo DR-UN7 Instruction Manual

Customizing the Source Names

You can change the source name that appears in the display to suit any component you connected per the instruc-
tions on pages 21-23.
Display
1
Press INPUT
whose name you wish to change
appears in the display.
You can select TAPE, LINE or DIGI-
TAL.
2
Press EDIT/NO/CLEAR repeatedly
until "Name Select?" appears in
the display.
3 Press MULTI JOG.
4
Turn MULTI JOG to select a new
name for the source.
Depending on the source you've selected
in step 1, the name changes in the follow-
ing order:
"Complete" appears in the display.
TAPE
LINE
DIGITAL
GAME/dig
28
1
2
3-5
/ until the source
HDD CD-R
*1
PC
TV
GAME
TV/dig CD-R/dig
*1
PC/dig
*1 Select this if you connected an
Onkyo USB component that sup-
ports
5 Press MULTI JOG to enter the new
name.
"Complete" appears in the display. You
may press YES/MODE instead of
MULTI JOG to get the same result.
About short source names
The short source names appear in the display depending
on the situation. Check the short names in the table
below.
Ordinary names
CD-R
DIGITAL
GAME
HDD
LINE
PC
TAPE
TV
Note:
Pages 78 and 79 offer a list of the remote controller but-
tons you can use after you have changed the source
names.
connection.
Short names
CR
DG
GM
HD
LI
PC
TA
TV