Connecting External Control Devices; Ir In Port - Onkyo TX-NR797 Instruction Manual

Contents Connections Playback Setup
≫ ≫ ≫ ≫

Connecting External Control Devices

IR IN port

When connecting a remote control receiver unit consisting of an IR Receiver, etc.
to this unit, operation using the remote controller is possible even if the remote
control signal is difficult to reach (due to installation in the cabinet, etc.). You can
also operate the unit using the remote controller from a separate room such as
ZONE 2. For adopting a remote control receiver unit, contact the specialized
stores.
• For the type of cable required for connection, refer to the operation manual,
etc. of the remote control receiver unit.
IR Receiver
62
Front Panel≫ Rear Panel≫ Remote≫