Onkyo DR-UN7 Instruction Manual page 45

Selecting XM Radio Channels
There are two modes for selecting XM radio channels:
Channel Search mode , which allows you to select any
channel.
Category Search mode , which allows you to select
channels by category.
Use the remote controller to select XM radio channels.
1
3
2
3
I Channel Search Mode
1
Press INPUT
If "Antenna" appears on the display,
make sure the XM antenna is connected
properly.
2 Press MODE to select "Channel
Search" mode.
3
Use TUNING
channel and you can also use
(cursor) to select a category.
and
Channel number
Note:
Channels cannot be selected while the
is flashing, as tuning is in progress.
/ to select XM.
/ to select a
/
Channel name
indicator
Listening to the Radio —Continued
I Category Search Mode
1
Press INPUT
If "Antenna" appears on the display,
make sure the XM antenna is connected
properly.
2
Press MODE to select "Category
Search" mode.
3
Use /
egory, and use
select a channel in that category.
Note:
Channels cannot be selected while the
is flashing, as tuning is in progress.
Selecting the Previous Channel:
To listen to the previously selected XM channel.
1 Press RETURN button.
/ to select XM.
(cursor) to select a cat-
/ (cursor) to
indicator
45