Onkyo DR-UN7 Instruction Manual page 83

Connection with External Devices
The interoperability with other external Onkyo device
is not available.
• Make sure that the cable and analog audio cables
(RCA) are connected correctly. (See pages 21-23.)
Connecting only an cable won't work.
• Specify the source name in the display for the external
Onkyo device. (See page 28.)
No sound is heard from the connected device.
• Make sure that the optical digital cable is not bent over
or damaged.
• Set the digital output to PCM, because the DVD
receiver supports only PCM signals.
The turntable sounds still.
• Make sure if the turntable has built in phono equalizer.
• If the turntable has no phono equalizer built in, you
must provide one separately.
The turntable makes no sound.
• If your turntable uses an MC cartridge, you must con-
nect an MC transformer or an MC head amp.
Timer Function
Timer playback or recording does not work.
• The clock should be set correctly.
If the clock is not set, playback or recording does not
work. Make sure you program the current time.
(See page 62.)
• Timer operation is not activated if the power to the
unit is turned on before the timer On time. Be sure to
place the unit in Standby mode before timer operation
starts. (See page 67.)
• Programmed time may overlap with another timer. Be
sure to set multiple timers such that time ranges do not
overlap.
• If you try to set the Sleep timer or press TIMER during
timer operation, the current timer setting is cancelled.
• The timer operation uses the volume level that was set
before the unit was placed in Standby mode. Set an
appropriate volume level before you place the unit in
Standby mode. (See page 67.)
• Make sure that the cable and RCA/phono audio
cables are connected correctly.
• If you selected an external Onkyo component for the
timer operation, you must specify the source name.
Time display is not visible during Standby mode.
• Turn the current time display on while the unit is in
Standby mode. (See page 62.)
Troubleshooting—Continued
The Colors of the TV Picture Bleed
• Locate the speakers far from the TV.
Onkyo is not responsible for damages (such as CD
rental fees) due to unsuccessful recordings caused by
unit's malfunction.
Before you record important data, make sure that the
material will be recorded correctly.
This product uses a microcomputer to perform various
advanced functions. However, noise, radio interfer-
ence, or static electricity could occasionally cause the
unit to malfunction. In this case, unplug the power
cable from the AC outlet, then plug it in again in five
seconds.
83