7
Cleaning and caring for the unit
NOTICE
Risk of burns from hot surfaces
a) Allow surfaces to cool prior to cleaning.
SAFETY INSTRUCTIONS
Risk of physical damage from extremely abrupt cooling
a) Do not cool shock the unit by cooling it abruptly.
SAFETY INSTRUCTIONS
Risk of physical damage from improper cleaning
a) Do not clean the unit with a high-pressure cleaner.
7.1
Preventing corrosion
▪ Keep the surfaces of the unit clean, with access to air.
▪ Remove lime, grease, starch and protein deposits.
▪ Remove salt accumulations.
▪ Expose parts made from non-rusting steel only briefly to contact with
highly acidic foods, spices, salts or the like.
▪ Avoid damaging the stainless steel surface with other metal items, for
instance, steel spatulas or steel wire brushes.
▪ Prevent contact with iron and steel, for instance, steel wool and steel
spatulas.
▪ Do not use bleaching or chlorine-containing cleaning agents.
▪ Clean contact surfaces with water.
7.2
Remove rust spots
▪ Remove fresh rust spots with a mild abrasive or fine sandpaper.
▪ Always remove rust spots completely.
▪ Expose treated areas to fresh air for at least 24 hours. During this time,
do not allow any contact with greases, oils or foods so that a new
protective layer can form.
Cleaning and caring for the unit
Preventing corrosion
7
69