Registering Your Device; Contacting Garmin Product Support; Declaration Of Conformity; Software License Agreement - Garmin GPSMAP 5215 Owner's Manual

Transmitting NMEA 0183 Data over a NMEA 2000 Network
You can turn on, configure, or turn off output bridging. Output bridging occurs when a chartplotter takes
NMEA 0183 data it receives from any source, formats it into NMEA 2000 data, and sends it over the NMEA
2000 bus.
1. From the Home screen, select Configure > Communications > NMeA 2000 Setup > output Bridging.
2. Complete an action:
• Select on to enable output bridging from the chartplotter.
• Select Auto to allow the chartplotters on the NMEA 2000 network to negotiate with each other to
determine which chartplotter will perform this function. Only one chartplotter on the NMEA 2000
network can bridge NMEA 0183 data over the NMEA 2000 bus at a time.
All GPSMAP 4000 series and 5000 series units are NMEA 2000 certified.

Registering Your Device

Help us better support you by completing our online registration today.
1. Go to http://my.garmin.com.
2. Keep the original sales receipt, or a photocopy, in a safe place.

Contacting Garmin Product Support

Contact Garmin Product Support if you have questions about this product.
• In the USA, go to www.garmin.com/support, or contact Garmin USA by phone at (913) 397.8200 or (800)
800.1020.
• In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.
• In Europe, go to www.garmin.com/support
or contact Garmin (Europe) Ltd. by phone at +44 (0) 870.8501241.

Declaration of Conformity

Hereby, Garmin, declares that this product is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC. To view the full Declaration of Conformity, go to
www.garmin.com/compliance.

Software License Agreement

BY USING THE CHARTPLOTTER, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS
OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT
CAREFULLY.
Garmin Ltd. and its subsidiaries ("Garmin") grant you a limited license to use the software embedded in this
device (the "Software") in binary executable form in the normal operation of the product. Title, ownership
rights, and intellectual property rights in and to the Software remain in Garmin and/or its third-party providers.
You acknowledge that the Software is the property of Garmin and/or its third-party providers and is
protected under the United States of America copyright laws and international copyright treaties. You further
acknowledge that the structure, organization, and code of the Software, for which source code is not provided,
are valuable trade secrets of Garmin and/or its third-party providers and that the Software in source code
form remains a valuable trade secret of Garmin and/or its third-party providers. You agree not to decompile,
disassemble, modify, reverse assemble, reverse engineer, or reduce to human readable form the Software or
any part thereof or create any derivative works based on the Software. You agree not to export or re-export the
Software to any country in violation of the export control laws of the United States of America or the export
control laws of any other applicable country.
GPSMAP 4000/5000 Series Owner's Manual
®
and click Contact Support for in-country support information,
Appendix
107