Creating And Navigating A Route From Your Present Location - Garmin GPSMAP 5215 Owner's Manual

Navigation

Creating and Navigating a Route from Your Present Location

You can create and immediately navigate a route on the Navigation Chart or the Fishing Chart. This procedure
does not save the route or the waypoint data.
Note: The Fishing Chart is available if you use a BlueChart g2 Vision data card or a BlueChart g2 Data card,
or if your built-in map supports Fishing Charts.
1. From the Home screen, select Chart.
2. Select Navigation Chart or Fishing Chart.
3. Select a destination
➊
4. Select Navigate to > Route to.
5. Select the location
➋
6. Select Add turn.
➋
7. If necessary, repeat steps 5 and 6 to add additional turns, working backward from the destination to the
present location of your boat.
The last turn you add should be where you want to make the first turn from your present location. It should
be the turn that is closest to your boat.
8. Select Done when the route is complete.
Note: If you move the cursor after selecting the last turn but before selecting Done, an additional turn
will be added to the route.
9. Review the course indicated by the magenta line.
10. Follow the magenta line, steering to avoid land, shallow water, and other obstacles.
When you have reached the destination, you are prompted to save the route.
34
using the cursor.
where you want to make the last turn toward your destination
➊
:
➌
➌
GPSMAP 4000/5000 Series Owner's Manual
®