Download Print this page

Garmin GPSMAP 4010 Important Information

Gpsmap 4000/5000 series flush mount template in adobe acrobat
Hide thumbs Also See for GPSMAP 4010:

Advertisement

P
gPSMaP
rinting a
B
C
Notes:
(A) You must print the template on 11˝x17˝ paper. This is normally selected in the 'Printer Properties', and will differ by manufacturer.
• If your printer is not capable of printing on 11˝x17˝ paper, or you do not have 11˝x17˝ paper, you must print this template at an office
services store or similar location that has the ability to print on 11˝x17˝ paper.
(B) You must set the 'Page Scaling' setting to 'None'.
(C) Select 'Auto-Rotate and Center' to make sure the template prints in the correct orientation.
Important Information:
• Before cutting the mounting surface, measure the printout to make sure it printed at the correct size. Both the length and width
measurements are noted on the template. Verify both the length and width measurements before cutting.
• When cutting the Flush Mount template, cut inside the line, then sand and/or file the mounting surface to ensure a good fit.
4000/5000 S
®
erieS
Adobe Acrobat Print Dialog Box
F
M
t
luSh
ount
eMPlate in
a
a
dobe
crobat
A

Advertisement

loading

Summary of Contents for Garmin GPSMAP 4010

  • Page 1 gPSMaP 4000/5000 S ® rinting a erieS luSh ount eMPlate in dobe crobat Adobe Acrobat Print Dialog Box Notes: (A) You must print the template on 11˝x17˝ paper. This is normally selected in the ‘Printer Properties’, and will differ by manufacturer. • If your printer is not capable of printing on 11˝x17˝ paper, or you do not have 11˝x17˝ paper, you must print this template at an office services store or similar location that has the ability to print on 11˝x17˝ paper. (B) You must set the ‘Page Scaling’ setting to ‘None’. (C) Select ‘Auto-Rotate and Center’ to make sure the template prints in the correct orientation. Important Information: • Before cutting the mounting surface, measure the printout to make sure it printed at the correct size. Both the length and width measurements are noted on the template. Verify both the length and width measurements before cutting. • When cutting the Flush Mount template, cut inside the line, then sand and/or file the mounting surface to ensure a good fit.
  • Page 2 in. (312 mm) GPSMAP 4010/4210 ® Recommended clearance for sun cover handle FluSh Mount teMPlAte Espace de sécurité recommandé pour manipuler le pare-soleil Spazio libero consigliato per la maniglia della copertura di protezione dai raggi solari in. (340.4 mm) W × 8 Unit dimensions: 13 in.

This manual is also suitable for:

Gpsmap 4210