Garmin GPSMAP 5215 Owner's Manual page 15

Changing the Map Zoom Detail
You can adjust the amount of detail shown on the map, at different zoom levels, for the Navigation Chart or
the Fishing Chart.
1. From the Home screen, select Charts.
2. Select Navigation Chart or Fishing Chart.
3. Select Menu > Chart Setup > Chart Appearance > Detail.
7. Select a level of detail.
Selecting a World Map
You can use either a basic world map or satellite imagery on the Navigation chart or the Fishing chart.
Note: The Fishing Chart and satellite imagery are available if you use a BlueChart g2 Vision data card. The
basic world map is available on all GPSMAP 4000/5000 series chartplotters.
1. From the Home screen, select Charts.
2. Select Navigation Chart or Fishing Chart.
3. Select Menu > Chart Setup > Chart Appearance.
6. Complete an action:
• Select World Map > Full to show satellite imagery on the chart.
• Select World Map > Basic to show basic map data on the chart.
Showing and Configuring the Heading Line
The heading line is an extension drawn on the map from the bow of the boat in the direction of travel. You can
configure the appearance of the heading line for the Navigation Chart, Fishing Chart, or Radar Overlay.
Note: The Fishing Chart is available with a preprogrammed BlueChart g2 Vision data card.
1. From the Home screen, select Charts.
2. Select Navigation Chart, Fishing Chart, or Radar overlay.
3. Select Menu.
4. Complete an action:
• Select Chart Setup > Chart Appearance on the Navigation Chart or Fishing Chart.
• Select Setup > Chart Setup on the Radar Overlay.
5. Select Heading Line > Display.
6. Complete an action:
• Select Distance > Change Distance. Enter the distance to the end of the heading line. Select Done.
• Select time > Change time. Enter the amount of time until you reach the end of the heading line.
Select Done.
GPSMAP 4000/5000 Series Owner's Manual
®
Heading Line
Charts and 3D Chart Views
11