Adjusting The Color Mode; Inserting And Removing Data And Memory; Cards; Viewing System Information - Garmin GPSMAP 5215 Owner's Manual

Adjusting the Color Mode

1. From the Home screen, select Configure > System > Beeper/Display > Backlight.
tiP: Select
from any screen to open the display screen.
2. Select Color Mode.
3. Select Day Colors, Night Colors, or Auto.
The Auto setting automatically changes the color scheme based on sunrise and sunset times.
Inserting and Removing Data and Memory Cards
You can insert optional BlueChart
reference photos of ports, harbors, marinas, and other points of interest. You can insert blank SD memory cards
to transfer data such as waypoints, routes, and tracks to another compatible Garmin chartplotter or a computer
(page 60). The Data card slot is located on the front of the chartplotter.
• Open the access door, insert the Data card (with the label
horizontal slot) into the slot, and press the card until it clicks.
• Press the data card or the memory card into the slot again and release it to eject the card.
Horizontal SD Card Slot

Viewing System Information

You can view the software version, the basemap version, any supplemental map information (if applicable),
and the unit ID number. You may need this information to update the system software or to purchase additional
map data information.
From the Home screen, select Configure > System > System information.
GPSMAP 4000/5000 Series Owner's Manual
®
g2 Vision data cards to view high-resolution satellite imagery and aerial
® ®
➊
facing right for a vertical slot or up for a
➊
➊
Vertical SD Card Slot
Getting Started
3