Incoming Distress Calls; Man-Overboard Distress Calls Initiated From A; Man-Overboard Distress Calls Initiated From The; Chartplotter - Garmin GPSMAP 5215 Owner's Manual

Digital Selective Calling
Adding a DSC Contact
You can add a vessel to your DSC list. You can make calls to a DSC contact from the chartplotter
1. From the Home screen, select information > DSC List > Add Contact.
2. Enter the Maritime Mobile Service Identity (MMSI) of the vessel.
3. Select Done.
4. Enter the name of the vessel.
5. Select Done.

Incoming Distress Calls

If your Garmin chartplotter and VHF radio are connected using NMEA 0183 or NMEA 2000, your chartplotter
alerts you when your VHF radio receives a DSC distress call. If position information was sent with the distress
call, that information is also available and recorded with the call.
The symbol designates a distress call in the DSC list and marks the position of the vessel on the
Navigation Chart at the time when the DSC distress call was sent.
Viewing the DSC Distress Call Report
See "Viewing a Position Report"
Calling a Vessel in Distress
See "Making an Individual Routine Call"
Navigating to a Vessel in Distress
The symbol designates a distress call in the DSC list and marks the position of a vessel on the Navigation
Chart at the time a DSC distress call is sent.
See "Navigating to a Tracked Vessel"
Creating a Waypoint at the Position of a Vessel in Distress
See "Creating a Waypoint at the Position of a Tracked Vessel"
Editing Information in a DSC Call Report
See "Editing Information in a Position Report"
Deleting a DSC Call Report
See "Deleting a Position Report"
Man-Overboard Distress Calls Initiated from a VHF Radio
When your Garmin chartplotter is connected to a Garmin NMEA 2000-compatible radio, and you initiate a
man-overboard DSC distress call from your radio, your Garmin chartplotter shows the man-overboard screen
and prompts you to navigate to the man-overboard point. If you have a Garmin autopilot system connected to
the network, your chartplotter prompts you to start a Williamson's turn to the man-overboard point.
If you cancel the man-overboard distress call on the radio, the chartplotter screen prompting you to activate
navigation to the man-overboard location disappears.
Man-Overboard Distress Calls Initiated from the Chartplotter
When your Garmin chartplotter is connected to a Garmin NMEA 2000-compatible radio and you activate
navigation to a man-overboard location, the radio shows the Distress Call page so you can quickly initiate a
man-overboard distress call.
On the radio, press and hold the DiStReSS key for at least three seconds to send the distress call.
For information on placing distress calls from your radio, see your Garmin VHF Radio Owner's Manual. You
can mark an MOB and navigate to it

Position Tracking

When you connect your Garmin chartplotter to a VHF radio using NMEA 0183, you can track vessels that
send position reports. This feature is also available with NMEA 2000, provided that the vessel sends the
correct PGN data (PGN 129808; DSC Call Information).
98
(page 99).
(page 100).
(page 99).
(page 99).
(page 99).
(page 33).
(page 99).
GPSMAP 4000/5000 Series Owner's Manual
®
(page 100).