Garmin GPSMAP 5215 Owner's Manual page 22

Charts and 3D Chart Views
4. Select time to to sound an alarm if AIS or MARPA determines that a target will intersect the safe zone
within the defined time interval (ranging from 1 to 24 minutes).
5. Select a time.
Viewing a List of AIS and MARPA Threats
Note: The Mariner's Eye 3D chart view is available if you use a BlueChart g2 Vision data card. The Fishing
Chart is available if you use a BlueChart g2 Vision data card or a BlueChart g2 Data card, or if your built-in
map supports Fishing Charts.
1. From the Home screen, select Charts.
2. Select Navigation Chart, Fishing Chart, Perspective 3D, Mariner's eye 3D, or Radar overlay.
3. Select Menu > other Vessels > List > Show.
4. Select the type of threats to include in the list (All threats, AiS threats only, or MARPA threats only).
Making a Call to an AIS Target
See "Making an Individual Routine Call to an AIS Target
About AIS Search and Rescue Transmitters
AIS Search and Rescue Transmitters (AIS-SART, or SART) are self-contained devices that transmit
emergency position reports when activated. SART transmissions are different than standard AIS transmissions,
so they appear differently on the chartplotter. Instead of tracking a SART transmission for collision avoidance,
you track a SART transmission to locate and assist a vessel.
Navigating to a SART Transmission
When you receive a SART transmission, a distress signal alarm appears.
Select Review > Go to to begin navigation to the SART transmision.
AIS-SART Targeting Symbols
Symbol Description
AIS-SART transmission� You can select this symbol to see more information about the SART
transmission and begin navigation�
AIS-SART transmission lost�
AIS-SART transmission test� This symbol appears when a vessel initiates a test of their SART
device, and does not represent a true emergency� You can disable these test symbols and
alerts�
AIS-SART transmission test lost�
Enabling AIS-SART Transmission Test Alerts
In order to avoid a large number of test alerts and symbols in crowded areas such as marinas, AIS-SART test
alerts ignored by default. To test an AIS SART device, you must enable the chartplotter to receive test alerts.
From the Home screen, select Configure > other Vessels > AiS SARt test.
18
(page 100).
GPSMAP 4000/5000 Series Owner's Manual
®