1. Manuals
  2. Brands
  3. Garmin Manuals
  4. Marine GPS System
  5. GPSMAP 8500 Black Box
  6. Instructions manual

Garmin GPSMAP 8500 Black Box Instructions Manual

Installation instructions
Hide thumbs Also See for GPSMAP 8500 Black Box:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
GPSMAP
®
Instructions
The GPSMAP 8500 is a highly customizable marine navigation
and information system. These instructions will explain the
connections between the various components of the system so
you can plan and install the best system for your boat.
In addition, these instructions will cover the mounting and wiring
of the primary GPSMAP 8500 device.
Important Safety Information
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
When connecting the power cable, do not remove the in-line
fuse holder. To prevent the possibility of injury or product
damage caused by fire or overheating, the appropriate fuse
must be in place as indicated in the product specifications. In
addition, connecting the power cable without the appropriate
fuse in place will void the product warranty.
Understanding the Components
The GPSMAP 8500 system can be set up in different ways, depending on your needs and the layout of your boat.
The GPSMAP 8500 is the brain of a GPSMAP 8500 system and it connects to other devices and GPSMAP 8500 systems on your
boat. The GPSMAP 8500 can be controlled by a connected GMM™ monitor, a connected GRID™ input device, or combination of
the two.
December 2012
8500 Installation
WARNING
Always wear safety goggles, ear protection, and a dust mask
when drilling, cutting, or sanding.
When drilling or cutting, always check what is on the opposite
side of the surface.

Registering Your Device

Help us better support you by completing our online registration
today.
• Go to http://my.garmin.com.
• Keep the original sales receipt, or a photocopy, in a safe
place.

Contacting Garmin Product Support

• Go to
www.garmin.com/support
for in-country support information.
• In the USA, call (913) 397.8200 or (800) 800.1020.
• In the UK, call 0808 2380000.
• In Europe, call +44 (0) 870.8501241.
190-01558-02_0A
CAUTION
NOTICE
and click Contact Support
Printed in Taiwan

Advertisement

Table of Contents
loading

Related Manuals for Garmin GPSMAP 8500 Black Box

Summary of Contents for Garmin GPSMAP 8500 Black Box

  • Page 1: Registering Your Device

    In addition, these instructions will cover the mounting and wiring • Go to http://my.garmin.com. of the primary GPSMAP 8500 device. • Keep the original sales receipt, or a photocopy, in a safe place.
  • Page 2 The GRID is a remote input device that controls the functions of the GPSMAP 8500. The GRID connects to the GPSMAP 8500 with a standard Garmin Marine Network cable. If more than one system is present on the boat, the GRID is assigned to a specific GPSMAP 8500 in the software configuration.

  • Page 3: Mounting Considerations

    Mounting Considerations Mounting the Card Reader NOTICE NOTICE Be careful when cutting the hole to flush mount the device. If the device is mounted vertically, it is important to install it with There is only a small amount of clearance between the case the connectors pointing downward.

  • Page 4: Connection Considerations

    If necessary, the power cable can be extended using the appropriate wire gauge for the length of the extension. • Although it is recommended to use the Garmin provided DVI- D cables, high-quality third-party DVI-D cables may be used. You should test the DVI-D cable by connecting the devices before routing the cable.

  • Page 5: Garmin Marine Network Considerations

    Install the locking ring and o-ring on the ends of the Garmin GPSMAP 8500 to your existing NMEA 2000 network or create a Marine Network cable. basic NMEA 2000 network if needed. Connect the Garmin Marine Network cable to the GARMIN...
  • Page 6 Standard NMEA 0183-Compliant Device Item Description 12 Vdc power source Power cable NMEA 0183-compliant device NMEA 0183 cable Item Garmin Wire Function Garmin Wire Color NMEA 0183 Device Wire Function Power Power Power ground Black Power ground Data ground Black...
  • Page 7 There are four internal NMEA 0183 input ports (RX ports), and two internal NMEA 0183 output (TX ports) on the included NMEA 0183 data cable. You can connect one NMEA 0183 device per internal RX port to input data to your Garmin device, and you can connect up to three NMEA 0183 devices in parallel to each internal TX port to receive data output by your Garmin device.
  • Page 8 NOTE: This diagram illustrates both sending and receiving connections. Refer to items , and when connecting the Garmin device to receive information from a NMEA 0183-compatible device, and refer to items , and when connecting the Garmin device to transmit information to a NMEA 0183-compatible device.
  • Page 9 Item Description NMEA 0183-compliant device NMEA 0183 cable Item Garmin Wire Function Garmin Wire Color NMEA 0183 Device Wire Function Power Power Power ground Black Power ground Data ground Black Data ground RxA (+) White TxA (+) RxB (-) Orange/white...
  • Page 10 GMM or on an additional 10–35 Vdc power source monitor connected to the same GPSMAP 8500. Power cable Composite video is not shared across the Garmin Marine Horn Network or NMEA 2000 network. Lamp •...

  • Page 11: Specifications

    128267 Water depth prior to the GPSMAP 8000 Series and GPSMAP 8500. 129025 Position: Rapid update Connect the card reader to a Garmin device on the Garmin 129038 AIS class A position report Marine Network using a Garmin Marine Network cable.
  • Page 12 Garmin Ltd. or its subsidiaries, registered in the USA and other countries. 1200 East 151st Street GMM™, and GRID™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express Olathe, Kansas 66062, USA permission of Garmin.

This manual is also suitable for:

Gpsmap 8530 black boxGpsmap 8500

Table of Contents