Epson CW3S16 Operation Manual page 44

System
Use this
parameter to
RAM during the start-up routine.
Video
l
This parameter loads the program code from your video
card into shadow RAM during system start up.
System + Video
l
This option loads the System BIOS and video code into
shadow RAM.
Scratch RAM Option.
The next option is the setting of the scratch RAM. The
purpose of this element is to
(1) Save the user definable drive type 47
(2) Translate 80386 Loadall function for programs like
OS/2, RAMDRIVE etc.
If Shadow RAM is not enabled, the parameters of the drive
must be stored in normal RAM, but the integrity of the
data must be maintained. The options you have are the
following:
1. The BIOS to use 100 bytes at 30h:O
2. The BIOS to reduce the size of the base memory by 1KB.
The default is 1. If you are not using Drive type 47 or not
running programs like OS/Z, RAMDRIVE this RAM will
never be used by so you may leave the value as 1.
Start-up Speed
This parameter is used to select the system's default speed.
The options are:
High speed
l
Under this option, your system is initially booting with
16MHz CPU speed when you turn the power on.
copy the system BIOS into shadow
The CMOS Setup Program
2-7