If you hit <DEL > key, you will see a menu like as following.
RUN CMOS SETUP
RUN DIAGNOSTICS
Set the reverse video cursor on the "RUN CMOS SETUP"
using <Up • > and <Down • > and press < ENTER> . Then
the screen will be replaced by the following.
Floppy drive B:
Hard disk C: type
Hard disk D: type
Serial Fort
highlights the parameter currently available to be changed. You
can use the following key conventions.
2-4
The CMOS Setup Program
: Not Unstalled
Cyln Head Wpcom LZone Sec.
: 17
: Not Installed
: COM1+COM2
977
5
300
Size
977
17
41MB