Error Messages - Epson CW3S16 Operation Manual

Error Messages

Error messages can either be ROM Diagnostics generated, or
controller generated. The error messages encountered while
performing any of the diskette functions are displayed in a
window with 2 lines:
Line 1
Line 2
The actual error message could be any one of the following:
ROM Diagnostics Generated
Error Messages
Warning - Change line is inoperational
This error message is generated while running the "Disk
change line test" if the program detects that the disk change is
not working. This can also happen if you have not removed
and reinserted the diskette as requested during the test. Replace
the disk drive if you suspect a faulty drive.
CHANGE LINE Not Available
This error message is generated if the Disk change line test is
performed on a 360KB or 720KB drive.
Controller Generated Error Messages
TIMEOUT error (Diskette drive not ready)
l
BAD SEEK error (Seek operation failed)
l
BAD CRC error (Cyclic redundancy check (CRC) error on
l
diskette read)
Advanced ROM Diagnostics
E-34
***ERROR***
The actual error message