Epson CW3S16 Operation Manual page 199

Warning!
This test is a destructive operation. This means that the
data on the diskette required to perform these tests will be
destroyed. When performing these operations, be certain
that the formatted diskettes required for these tests do not
contain valuable information which cannot be recovered
from the hard disk or from another diskette.
To perform a Diskette Format Test:
Highlight "Floppy" in the main menu by using the left and
right arrow keys. Below this menu is another menu which lists
all possible tests available for the Floppy drive. At this Floppy
Disk Menu, "Diskette format" should be highlighted with the
bar cursor. Press < ENTER > . That causes the Diskette format
box to appear on the left side of the screen. The box contains
the following questions (fields) that must be answered with
appropriate responses. These are:
Floppy Disk Drive (A/B)
Proceed (Y/N)
The response for the first field depends upon the response
given in the CMOS Setup screen. If the response entered by
the user at the CMOS Setup screen was "A," this field will
automatically display "A." If the response entered by the user
at the CMOS Setup screen was "B," this field will
automatically display "B." When you are satisfied with the
information entered for the first field, enter "Y" at the
"Proceed" field.
Note
Entering "N" (the default) will return you to the Floppy
Drive Menu.
E-36 Advanced ROM Diagnostics
?
?