Epson CW3S16 Operation Manual page 176

The Bad Track Edit Menu
With the block cursor highlighting "Add an entry," press
< ENTER
> . This will cause another box to appear below the
Bad Track Edit Menu. This box asks you to enter the track
number for the entry you wish to add. When the box first
appears, either the default (0) value or the previous value
entered will appear. The cursor will blink below the value,
prompting you to either accept the value by pressing
<ENTER
> , or enter a new value. After pressing
< ENTER
> , the cursor will prompt you to enter a value for
head number. You may accept the default value (0), or the
previous value entered, by pressing
this value, type a new value and press
box will disappear and the block cursor will once again
highlight "Add an entry" in the Bad Track Edit Menu. To add
more entries, press
The program will not accept dual entries. Attempting to enter
dual entries will prompt the box to display the message, "Entry
already present, enter again." The cursor will return to the
track number field, prompting you for a new value. Entries are
listed in the Bad Track List box.
Using the down arrow key, move the block cursor to "Revise
an entry" in the Bad Track Edit Menu. Press
The last entry in the Bad Track List will be highlighted with
the block cursor. To select an entry for revision, use the up and
down arrow keys to highlight the desired selection. Press
< ENTER
> . The entry box will disappear and the block
cursor will once again highlight "Add an entry" in the Bad
Track Edit Menu. To add more entries, press
< ENTER > .
Advanced ROM Diagnostics
< ENTER
> . To change
< ENTER > .
< ENTER>.
< ENTER > .
The entry
E-13