Interleave Factor - Epson CW3S16 Operation Manual

Interleave Factor

After pressing
cursor will blink below either the default value or the previous
value entered for the "Interleave (l-16)" field. The default
value is the previous value determined by Auto Interleave.
Type the desired value and press
move to the next field, "Mark Bad Tracks (Y/N)."
ROM DIAGNOSTICS, (C) 1986. American Megatrends Inc Tue, Feb 13, 1990 ll:49:07
Disk Drive (C/D)
Disk Drive Type
Interleave (1-16)
Mark Bad Tracks (Y/N)
Start Cylinder Number
End Cylinder Number
Start Head Number
End Head Number
Preformat Hard Disk
Figure E-3. Performing A Hard Disk Format Test:
< ENTER
> at the "Disk Drive type" field, the
? Y
?
?
Marking Bad Tracks
Advanced ROM Diagnostics
<ENTER
> . The cursor will
Revise an entry
Delete an entry
Clear bad trk list
Save
and
Exit
E-11