Epson CW3S16 Operation Manual page 110

Move the screen cursor bar down to the Hard Disk C
parameter. Using the 'PgUp and PgDn keys, scroll through the
options to disk type number matched with the hard disk you
have. If you select the type number 17 for 41MB hard disk, it
provides the following information under the right hand headings:
H d P r e
Cyl
'977 5
This should match the information provided with your hard
disk drive. Other hard disk drives may require a different disk
type number. See the instructions provided with your hard disk
drive or call your dealer for assistance. After verifying the hard
disk drive type number, press the ESC key. The computer
responds with:
Write data into CMOS and exit (Y/N)?
Press Y. The computer will update the information in its
configuration RAM, and will go through the start-up routine
again. Make sure MS-DOS is installed on floppy disk or hard
disk of your system, so the system will boot up in MS-DOS.
Note
Your system has an on board IDE type HDC and if you
want to install the another type of HDD except IDE, you
must disable the on board IDE HDC using the BIOS setup
program. See Chapter 2 for the detailed information of it.
LZ Sec
300 977 17
Size
41
Using Your Hard Disk
6-5