Adjusting Signal Settings - Epson PowerLite 835p User Manual

For standard sRGB computer displays (the default
sRGB:
when projecting from a computer with analog video).
■
Brightness
Lightens or darkens the overall image.
■
Contrast
Adjusts the difference between light and dark areas.
■
Sharpness
Adjusts the sharpness of the image.
■
Color Adjustment
Adjusts the tint of the image (not available for RGB video
images).

Adjusting Signal Settings

Although the projector normally detects and optimizes the input
signal automatically, you can use the Signal menu to make manual
adjustments. In addition to changing the position of the projected
image, you can correct tracking and sync for computer images, or
change the aspect ratio to widescreen format for video images.
1. Press the button on the remote control and select the
Menu
menu.
Signal
You see a screen similar to the one below. (The settings will be
different depending on the source you are projecting from.)
note
The setting
Brightness
changes the opacity of the
projector's LCD panels. You
can also change the lamp's
brightness. Select
Brightness Control
Setting menu, then choose
or (the default
High Low
setting is ).
High
note
You can also use the remote
control's button to
Auto
automatically reset the
projector's tracking, sync,
resolution, and position
settings. See page 28 for
details.
Fine-Tuning the Projector
in the
121