Adding Leap Authentication - Epson PowerLite 835p User Manual

note
If you want to enter a blank
space, use the space character
that comes before the capital
letter A.
If you want to enter
numbers, press the
Num
button on the remote
control. The button lights up
to indicate that the numeric
keypad mode is active. Press
the button again to
Num
exit numeric keypad mode.
Presenting Through a Wireless Network
82

Adding LEAP Authentication

When you click the
Security
this screen:
1. Highlight , then press
LEAP
2. Enter the user name and password that match the settings on your
authentication server:
■ Highlight the
turns yellow to indicate you are in input mode. Press the
pointer button up to select individual letters in
alphabetical order, or down to select letters in reverse order;
then press the
next character position. When done typing the user name,
press .
Enter
■ Highlight the
turns yellow to indicate you are in input mode. Press the
pointer button up to select individual letters in
alphabetical order, or down to select letters in reverse order;
then press the
next character position. When done typing the password,
press .
Enter
3. When you're done making settings, highlight the
the top of the screen and press
button on the Network screen, you see
.
Enter
text box and press
User name
pointer button to the right to move to the
text box and press
Password
pointer button to the right to move to the
.
Enter
. The box
Enter
. The box
Enter
button at
OK