Epson PowerLite 835p User Manual page 19

4. Press the red P
Power
the P button on the remote control.
Power
(If this is your first time using the remote control, make sure the
batteries are installed and the
remote is turned on.)
The projector beeps once and the
projector warms up, then an image begins to appear. When the
light stops flashing and remains green, the projector is
Power
ready for use.
5. If you've connected a Windows-based computer to the projector,
you may see a New Hardware Wizard screen saying your
computer has found a plug-and-play monitor; if so, click
6. If you are prompted to enter a password, see page 127.
button on top of the projector—or press
switch on the side of the
ON/OFF
light flashes green as the
Power
Power button
warning
Never look into the lens
when the lamp is on. This
can damage your eyes, and is
especially dangerous for
children.
note
To conserve electricity and
make the lamp last longer,
you can enable the Sleep
Mode function. This feature
turns off the lamp and
reduces power consumption
.
Cancel
whenever the projector has
not received any signals for
30 minutes. See page 134
for more information.
Displaying and Adjusting the Image
Power button
Turn on
remote
19