Epson PowerLite 835p User Manual page 69

You see the following screen:
Access point
mode
Make sure
Access point mode
not, use the pointer button on the remote control to highlight
the checkbox next to
to select it.
4. Make sure the projector has a unique name so you can identify it
when connecting to it from your computer.
If you need to rename it, highlight the Projector Name text box
and press . The text box turns yellow to indicate you are in
Enter
input mode. Press the
letters in alphabetical order, or down to select letters in reverse
order; then press the
the next character position. When you're done typing the new
name, press
Enter
is selected, as shown above. If
Access point mode
pointer button up to select individual
pointer button to the right to move to
.
, then press
Enter
Presenting Through a Wireless Network
note
If you want to enter a blank
space, use the space character
that comes before the capital
letter A.
If you want to enter
numbers, press the
Num
button on the remote
control. The button lights up
to indicate that the numeric
keypad mode is active. Press
the button again to
Num
exit numeric keypad mode.
69