Epson PowerLite 835p User Manual page 67

Setting Up Your Macintosh for Ad Hoc Mode
Your AirPort software is automatically configured to allow your
Macintosh to detect both computer-to-computer (Ad Hoc) and
Access Point networks.
Typically, you only need to select your projector's ESSID from the
AirPort status menu on the Macintosh menu bar. If you're having
problems detecting the projector, follow these steps:
1. From the Apple pull-down menu, select
2. Double-click the
Network
window.
3. Make sure Location is set to
Select
Automatic
Select Network Port
Configurations
then select AirPort
4. Select
Network Port Configurations
menu.
5. Under Port Configurations, select
6. Click
Apply Now
System Preferences
icon. You see the Network settings
.
Automatic
in the Show pull-down
AirPort
. Then close the window.
.
.
Presenting Through a Wireless Network
note:
If you don't need the other
network port
configurations, disable
them by deselecting their
checkboxes. If more than
one network port is
enabled, the projector
software warns you to
turn off AirPort when you
first connect the projector.
Disregard this message.
67