Adjusting Signal Settings
Although the projector normally detects and optimizes the input
signal automatically, you can use the Signal menu to make manual
adjustments. In addition to changing the position of the projected
image, you can correct tracking and sync for computer images, or
change the aspect ratio.
1. Press the
button and select the
Menu
screen similar to one of those below. (The settings will be different
depending on the source you are projecting from.)
Computer/RGB video
Composite video/S-Video
2. Adjust the desired options as needed:
■
Auto Setup
Leave this setting
images. Turn it off if you want to save adjustments you have
made to the Tracking, Sync, and Position settings.
Signal
Component video
HDMI
(PowerLite X10+/PowerLite W10+ only)
to automatically optimize computer
On
menu. You see a
Fine-Tuning the Projector
71