Epson PowerLite 835p User Manual page 63

2. To select , press the
Config
You see the following screen:
Easy connect
mode
Make sure
Easy connect mode
If not, use the pointer button on the remote control to
highlight the checkbox next to
to select it.
Enter
3. Make sure the projector has a unique name, so you can identify it
when connecting to it from your computer.
If you need to rename it, highlight the
then press . The outline of the text box turns yellow to
Enter
indicate you are in input mode. Press the
select individual letters in alphabetical order, or down to select
letters in reverse order; then press the
right to move to the next character position. When you're done
typing the new name, press
button on the remote control.
Enter
is selected, as shown above.
Easy connect mode
Projector name
pointer button up to
pointer button to the
.
Enter
, then press
note
If you want to enter a blank
space, use the space character
that comes before the capital
letter A.
text box
If you want to enter
numbers, press the
button on the remote
control. The button lights up
to indicate that the numeric
keypad mode is active. Press
the
exit numeric keypad mode.
Presenting Through a Wireless Network
Num
button again to
Num
63