Adjusting The Image Size, Shape, And Position - Epson PowerLite 835p User Manual

Component Video
component video signal.
: Use
Progressive
automatically determine the setting, choose
images, or choose
signals to progressive signals.
■
Video Signal
Leave this setting at
system (select
Adjusting the Image Size, Shape, and
Position
Whether you're projecting from a computer or video player, you can
use these settings to adjust the size, shape, and position of the image.
■ Resize button
Adjusts how an image fits into the display area.
For computer images, resizing is normally unnecessary, since the
projector automatically resizes the image to make the best use of
the display area. If you press the
or remote control, the projector displays the image at the output
resolution of the computer (which makes the image larger or
smaller, depending on its resolution). If the resolution of the
image is the same as the projector's (1024
has no effect.
For video images, pressing
between 4:3 and 16:9. This lets you play certain digital video
images or movies recorded on certain DVDs in 16:9 widescreen
format.
(in the Setting menu)
■
Keystone
Squares up the shape of the image after the projector has been
tilted upward or angled to one side (see page 26). If you notice
lines or edges looking jagged after adjusting the shape, decrease
the Sharpness setting (see page 120).
: For a video player that outputs a
for projecting film or to
Film/Auto
to convert each field of interlaced
OFF
unless you are using a 60-Hz PAL
Auto
).
PAL60
button on the projector
Resize
switches the aspect ratio
Resize
for video
Video
× 768), pressing
Resize
Fine-Tuning the Projector
note
If your computer image is
stretched, compressed, or
doesn't fit correctly on the
screen, try adjusting the
Resolution setting first (see
page 122).
123