Removing The Wireless 802.11G Card - Epson PowerLite 835p User Manual

Removing the Wireless 802.11g Card

Follow these steps to remove the card from your projector.
1. If you're running NS Connection, click
control bar.
2. Check the card indicator light to make sure it isn't flashing or on.
Then press the eject button. The button pops out.
3. Press the eject button again. The wireless card partially ejects.
4. Pull the card straight out. Then press the eject button back in to
prevent it from being damaged.
on the
Disconnect
Click
Disconnect
Indicator light
Eject button
Presenting Through a Wireless Network
caution
Never remove the card while
the card indicator light is
green or when projecting
wirelessly. You may damage
the card or lose data.
93