Unpacking The Projector; Additional Components - Epson PowerLite 835p User Manual

note
You won't need all these
components; your
configuration will determine
which ones you need.
Welcome
12

Unpacking the Projector

After unpacking the projector, make sure you have all the parts shown
below:
Projector
Power cord
Save all packaging in case you need to ship the projector. Always use
the original packaging (or the equivalent) when you need to send the
projector to another location. If you are moving the projector by
hand, use a carrying case. See page 13 for ordering information, and
page 166 for transportation instructions.

Additional Components

Depending on how you plan to use the projector, you may need
additional components:
■ To receive an S-Video signal, you'll need an S-Video cable. One
may be provided with your video equipment, or you can purchase
one from Epson; see page 13.
To receive a component video signal from a VCR or other video
■
device, you'll need a component video cable. You can purchase
one from Epson; see page 13.
EastMP™ software
Remote control and
batteries
VGA computer cable
802.11g wireless card
CD-ROM
USB cable