Presenting The Scenario; Controlling Your Presentation - Epson PowerLite 735c User Manual

Presenting the Scenario

Once you've inserted the memory card, you can present your scenario:
1. Turn on the projector, if it's not already on.
If your scenario is set to autorun, it will start as soon as the
projector warms up.
If your scenario is not set to autorun, you need to start it
manually. Continue with the following steps.
2. Select as the source by pressing the
EasyMP
button on the remote control. You see this screen:
Two types of icons appear on the screen:
Folders (containing images used by your scenarios)
Scenarios
3. Use the arrow buttons on the remote control to highlight your
scenario file, then press
4. Press again
Enter .

Controlling Your Presentation

While your presentation is running, use the remote control as follows:
Press or
Enter Page down
Press to display the previous slide.
Page up
To exit the scenario at any point, press the
button to confirm that you want to exit.
Enter
.
Enter
In a moment, your scenario begins playing.
to display the next slide.
Comp/EasyMP
button. Press the
ESC
Presenting from a Memory Card
note
Your files may take up more
than one screen. If so, use the
and
Page up Page down
buttons on the remote
control to view all your files.
note
Even if your scenario is set to
change slides automatically,
you can still change slides
manually as described here.
67