Selecting The Image Source - Epson PowerLite 735c User Manual

3. Press the red P
Power
also use the P
Power
your first time using the remote, be sure to remove the plastic tape
as shown on page 22.)
Power button
The P power light flashes green as the projector warms up, and
the projection lamp comes on in about 40 seconds.
4. If you've connected a Windows-based computer to the projector,
you may see a New Hardware Wizard saying your computer has
found a plug-and-play monitor; if so, click

Selecting the Image Source

Selecting the image source lets you switch between images input from
different pieces of equipment connected to the projector (such as a
computer or DVD player), or turn on EasyMP (for wireless network
or memory card presentations).
If you don't see the image you want, make sure the correct source is
selected, using either the
and
Comp/EasyMP S-Video/Video
Control panel
Select image
source
button on top of the projector. You can
button on the remote control. (If this is
Cancel
button on the projector, or the
Source
buttons on the remote control.
Remote control
Page down Page up
Comp/EasyMP S-Video/Video
Menu A/V Mute
E-Zoom
Enter
Auto
.
Power
Color Mode
Freeze
ESC
Displaying and Adjusting the Image
warning
Never look into the lens
when the lamp is on. This
can damage your eyes, and is
especially dangerous for
children.
note
To focus and adjust the
image, see page 17. If a
projected image fails to
appear, see page 14 for help.
11