Epson PowerLite 735c User Manual page 47

If it's not listed, click
access point.
14. When done making your settings, click
box.
Now you're ready to connect to the projector. See "Running NS
Connection" on page 42.
Checking the Gateway IP Address
If you're entering IP addresses manually and need to find out the
gateway IP address (the IP address of your access point), make sure the
wireless connection to the access point is currently active, as described
in the previous section. Then follow these steps:
1. Access your wireless network Properties window. For example, in
Windows XP you would click
and Internet Connections
icon.
Connections
You see a screen similar to this:
2. Right-click the
Wireless Network Connection
. Then click the
Status
and then type the name of your
Configure
to close the dialog
OK
Start > Control Panel > Network
. Then click the
Right-click and select
Status
tab.
Support
Network
icon and select
Presenting Through a Wireless Network
note
If you cannot identify the
gateway address using this
Windows utility, use the
administrator's utility
software that came with
your access point.
41