Epson PowerLite 735c User Manual page 37

arrows to select individual characters, and use the right arrow to
move to the next character position. When done typing the new
name, press .
Enter
5. To enable your computer to find the projector on the network,
select the appropriate
Select
ESSID ad hoc
or ESSID identifier (see page 33). Then enter a name (for
example, "CONF ROOM") in the
. Note that the ESSID is case-sensitive (if you enter the
Enter
name in upper-case on the projector, you must type it the
same way on the computer connecting to the projector).
Select
Channel ad hoc
channels instead of ESSID names to identify devices on the
network. Then select a channel number in the
box and press
6. If you want to set up a security keyword so that only people who
are in the same room as the projector can access it, turn
on. Then when you want to connect to the projector, it
keyword
displays a randomized four-digit number or "keyword" on the
screen. When prompted by NS Connection, you can enter the
keyword on your computer to connect (see page 43).
7. When done making these settings, highlight the
top of the screen (you can either use the arrow buttons on the
remote control or press
Highlight the
OK
main EasyMP Network Screen.
Configuring the Network Settings on Your Laptop
or PC
Before connecting to the projector, you need to make sure the settings
for your laptop's or PC's network card match the settings you entered
for the projector.
1. Access your wireless network Properties window. For example, in
Windows XP you would click
and Internet Connections
icon.
Connections
Ad hoc mode settings
if your network card supports an SSID
ESSID
if your network card supports using
.
Enter
to highlight it), then press
ESC
button again and press
Start > Control Panel > Network
. Then click the
:
text box and press
text
Channel
Projector
button at the
OK
.
Enter
to return to the
Enter
Network
Presenting Through a Wireless Network
note
If you want to enter a blank
space, use the space character
that comes before the capital
letter A.
note
On some Windows systems,
you can right-click
or
My Network Places
Network Neighborhood
on the desktop and select
.
Properties
31