To ensure the image on screen is shaped correctly (square or
rectangular, not "keystone" shaped), place the projector directly in
front of the center of the screen, facing it toward the screen squarely.
Screen
It's best to place the projector level with the bottom of the screen, or
slightly lower. If you place the projector below screen level, you'll have
to tilt it up by extending its feet. This causes the image to lose its
square shape, but the projector automatically compensates. You can
further correct the distortion by pressing the
described on page 19.
Overhead View
Keystone
Projector
note
After positioning the
projector, you may want to
connect a Kensington
MicroSaver
device to the lock port on the
projector's left side. You can
button as
purchase this from EPSON;
see "Optional Accessories" on
page 6
Ideal
height
Displaying and Adjusting the Image
®
anti-theft
.
9