Connecting Video Equipment - Epson PowerLite 735c User Manual

Presenting from Computer or Video Equipment
48

Connecting Video Equipment

You can connect a DVD player, VCR, camcorder, laser disc player,
digital camera, or any other compatible video source to your projector.
You can connect one or more video sources at the same time.
1. Look at your video device to determine its available video-output
connections:
for composite video, use an RCA cable (included with the
projector)
for S-video, use an S-video cable (may be included with your
video equipment)
for component video, use a BNC-to-VGA video cable
(available from EPSON; see page 6)
2. Connect the appropriate cable between the connector on your
video device and the corresponding connector on the projector:
S-video
Component video
3. If you're using component video, you have to switch the source to
, then change the
Computer
menu to the
YCbCr
page 77).
If you don't need to make any other connections, see Chapter 1 for
instructions on turning on the projector and adjusting the image.
RCA (composite) video
Input Signal
or
YPbPr Component Video
setting in the Video
setting (see