Epson PowerLite 735c User Manual page 41

Make sure
Access point mode
use the arrow buttons on the remote control to highlight the
checkbox next to
Access point mode
to select it.
3. Use the arrow buttons to highlight
), then press
point mode
You see this screen:
4. Make sure the projector has a unique name, so you can identify it
when connecting to it from your computer.
If you need to rename it, highlight the
, then press
Projector name
highlight the text box and press
arrows to select individual characters, and use the right arrow to
move to the next character position. When done typing the new
name, press .
Enter
5. To enable your computer to find the projector on the network,
you need to enter the ESSID (or SSID) identifier of your access
point. Highlight
ESSID
name of your access point in the text box; use the name that was
assigned to the access point when it was set up. Note that the
ESSID is case-sensitive (if it was typed in upper-case when the
access point was set up, you must enter it the same way in the
projector).
is selected, as shown. If not,
, then press
(next to
Advanced
to select it.
Enter
button next to
Clear
to clear the text box. Then
Enter
. Use the up and down
Enter
and then press . Then enter the
Enter
Enter
Access
note
If you want to enter a blank
space, use the space character
that comes before the capital
letter A.
Presenting Through a Wireless Network
35