Video Signal (video only)
Leave this setting at
system (select
Aspect Ratio (all sources except computer RGB)
Sets the aspect ratio to 4:3 or 16:9 (letterbox format).
Input Signal (computer RGB only)
Selects the appropriate source for the device connected to the
Computer/Component Video port.
Auto Setup (computer RGB only)
When switching image sources, automatically optimizes the
image.
Reset
Returns all settings in the Video menu to their default values.
4. After making any needed adjustments, press
Adjusting the Sound
You can use the Audio menu to adjust the sound volume or
treble/bass balance.
1. Press the
button on the remote control. You see the menu
Menu
screen.
2. Use the
button to highlight
3. Press
to select the Audio menu.
Enter
unless you are using a 60-hertz PAL
Auto
).
PAL60
. You see this screen:
Audio
to exit.
Menu
Fine-tuning the Projector
77