Epson PowerLite 735c User Manual page 39

4. Click the
Advanced
5. Check your network card's device settings. (Depending on the
type of card or wireless transmitter you're using, some of the
settings may be described differently from those listed here.)
Set the network type to
Set the SSID to match the name you assigned to the
projector's ESSID—for example,
network card uses channel mode instead, set the correct
channel, 1 to 11, so it matches that of the projector.)
Make sure encryption is
6. Click the
General
wireless network device is enabled.
7. When done making the settings, click
card's properties dialog box.
Now you're ready to connect to the projector. See "Running NS
Connection" on page 42.
tab. You see a screen similar to this:
802.11 Ad Hoc
CONF ROOM
.
Disabled
tab and make sure that the network card or
OK
.
. (If your
to close the network
Presenting Through a Wireless Network
33