Projecting Scenarios; Creating And Editing A Scenario; Basic Scenario Editing - Epson EB-1735W Operation Manual

Projecting Scenarios

This section describes the method for playing scenarios stored in a
USB storage device, and the operations during scenario playback.
Because the remote control is used to perform all of the following
steps, button names indicate remote control buttons.

Creating and Editing a Scenario

Create the scenario beforehand by using EMP SlideMaker2, and then
transfer it to the USB storage device in the projector by using the "Send
Scenario" function. s p.79
While transferring the scenario you can set autorun and
q
continuous play.
s

Basic scenario editing

f
For a scenario stored on a USB storage device, it is possible to change the
order in which images are projected, or set display/non-display of the
individual images.
Procedure
A
Use the [ ] buttons to position the cursor on the
icon corresponding to the scenario to be edited, and
then press [Esc] button.
p.79
B
Select "Edit Scenario" from the menu displayed, then
press the [Enter] button.
C
Position the cursor to the desired slide, and then
press the [Esc] button.
The sub menu is displayed.
Select "Move Files" to change the order of the slides, and "Show/
Hide" to show or to hide files, then press the [Enter] button.
Go to step 4 when you select "Move File".
Go to step 5 when you select "Show/Hide".
60