Bash Guard And Cover Installation - BAFANG MM G333.250.C Manual

6.3.5 Bash Guard and Cover Installation

Use a T10 Torx screw driver to tighten 3 M3*8 screws through hole sites on the covering case to the
frame interface, with tightening torque at 1 N.m.
Use an internal hex wrench to tighten 4 M5*8 screws through hole sites on the bash guard to the frame
interface, with tightening torque at 4 N.m.
A
B
A
B
8 BF-DM-C-MM G333-EN November 2019
Hexalobular socket pan head
screw M3*8
Cover
Hexagonal socket head cap
screw M5*8
Bash guard