6.3 DRIVE UNIT INSTALLATION
6.3.1 List of Tools to be used
Do not use impact wrenches.
Use of the Tools
To fasten screws onto the frame interface and the drive
unit
To fasten screws on the crank
To mount the bash guard and cover
To fasten screws on the motor cover and cable cover
To lock and loosen the lock nuts on the chain wheel
To fasten nuts onto the frame interface and the drive
unit
To connect the cabling
BAFANG tool
BF-DM-C-MM G333-EN November 2019
Tools
Internal hex wrench
T10 Torx screw driver
BAFANG tool
Socket spanner
(BAFANG: diameter=17.7mm,
length=63mm)
(OTHER: diameter <20mm, length
>35mm)
BAFANG tool
5