Install Drive Unit To Connection Interface - BAFANG MM G333.250.C Manual

6.3.2 Install Drive Unit to Connection Interface

Steps:
1) Align the Hole 1 on the frame interface with the mounting hole on the motor.
2) Rotate the motor anticlockwise around Hole 1, and align the Hole 2 and Hole 3.
3) Fasten 3 M8 bolts into Hole 1, 2, 3 from the right side to the left side.
4) Fasten the 3 M8 lock nuts with flat washers on the left of the frame, with tightening torque at 35 N.m.
A
B
C
D
6 BF-DM-C-MM G333-EN November 2019
M8 bolt
M8 flat washer
M8 lock nut
Tool-socket spanner