Setting Up The Scanner Server - Epson GT-10000 User Manual

The illustration below shows a sample network configuration in which network
scanning is available. The software you install depends on which computer you're
setting up—a scanner server or client computer.
EPSON GT-10000
* If you installed EPSON TWAIN Pro on the scanner server so that you could make a direct
connection to the scanner, remember that you must exit EPSON Scan Server to use EPSON
TWAIN Pro. EPSON Scan Server disables EPSON TWAIN Pro.

Setting Up the Scanner Server

You can set up any Windows 98, Windows 95, or Windows NT 4.0 computer as a
scanner server, as long as it is configured and operational on an existing network with
TCP/IP Protocol installed. If you don't have the TCP/IP Protocol installed on the
scanner server, see Appendix A, "Installing the TCP/IP Protocol," for instructions.
Be sure to unlock the scanner and connect it to the scanner server using the SCSI
cable that came with your scanner. (See Chapter 2, "Setting Up Your Scanner,"
for details.)
56
Network Scanning
Scanner Server
EPSON Scan Server
EPSON TWAIN Pro*
TWAIN-compliant software (such as
Presto! PageManager for EPSON)
Network
Client Computers
EPSON TWAIN Pro Network
TWAIN-compliant software (such as
Presto! PageManager for EPSON)