Setting Up The Scanner Server; Installing The Scanner Server Software On Windows 98 - Epson Expression 1600 User Manual

This chapter includes the following:
How to install, set up and start EPSON Scan Server on the scanner server
How to install and start EPSON TWAIN Pro Network on client computers
How to begin a scan from the client computer, the scanner server, or the scanner's
] Start button
How to stop a scan in progress.

Setting Up the Scanner Server

You can set up any Windows 95, Windows 98, or Windows NT 4.0 computer as a
scanner server, as long as it has a network interface card installed and is running the
TCP/IP protocol.
Before you begin, make sure to unlock the scanner and connect it to the scanner
server (see Chapter 2, "Setting Up Your Scanner," for details). If you don't have the
TCP/IP protocol installed on the scanner server, see Appendix B, "Installing the
TCP/IP Protocol."
Follow the instructions for your operating system:
If you're running Windows 98, continue with the next section, "Installing the
Scanner Server Software on Windows 98."
If you're running Windows 95 or NT 4.0, go to "Installing the Scanner Server
Software on Windows 95 and Windows NT 4.0" on page 74.
Installing the Scanner Server Software on
Windows 98
Depending on how your computer system was originally set up, you may be asked to
insert your Windows 98 CD-ROM during driver installation. Make sure you have it
available, or know where to find the Windows source files on your hard disk (for
example, in the Windows 98 folder). If you need help, contact your computer
manufacturer.
68