Using A Network Scanner - Epson GT-10000 User Manual

Using a Network Scanner

Here are a few guidelines for network scanning:
Turn on the scanner first. The scanner server must be turned on and running
EPSON Scan Server.
From a host application (such as Presto! PageManager) on the client computer,
start EPSON TWAIN Pro Network to establish a connection to the scanner
server. Only one client computer can access the scanner server at a time. (See
"Starting EPSON TWAIN Pro Network" on page 77 for instructions.)
Choose your settings, then place your document on the scanner or in the optional
automatic document feeder. (See Chapter 4, "How to Scan," for more
information.)
Start the scan. Although this can be done from EPSON TWAIN Pro Network on
the client computer, it may be more convenient to press the scanner's ] Start
button or to start the scan from the scanner server. A progress meter appears on
both the scanner server and client computer as the image is pre-scanned, then
scanned.
If you want to scan more than one image, place your second image on the
document table and press the scanner's ] Start button again. Repeat this step for
every image you want to scan. (The settings you chose for the first image apply to
these images too.)
When you return to the client computer, your scanned images appear in the host
application's window. Close EPSON TWAIN Pro Network to end your
connection to the scanner server and allow other client computers to use the
scanner.
When you press the ] Start button, some applications
automatically close the client computer's connection to the
scanner server when the scan is finished. You can't use the
] Start button to scan multiple images if you're using these
applications.
Network Scanning
75