Testing Your Scanner Connection - Epson GT-10000 User Manual

3. Select
Presto!
PageManager for
EPSON
(if necessary). (A
Reader
check mark appears beside
selected applications.)
4. Follow the instructions on the screen to install the software.
If you're done installing software, restart your computer. Then follow the instructions
in the next section to make sure your scanner is operating properly. If you want to
install PhotoDeluxe and TextBridge Pro, see page 33.

Testing Your Scanner Connection

You need to verify that your scanner was properly connected and the software was
installed correctly. Follow these steps to test scanner operation:
1. Double-click the
Cameras
Panel to open the Scanners and Cameras
Properties window.
2. Make sure
then click the
22
Setting Up Your Scanner
and
Acrobat
Don't select either of the two network applications, EPSON
TWAIN Pro Network or EPSON Scan Server. The EPSON
TWAIN Pro driver, which is already installed on your
computer, lets you scan to an EPSON GT-10000 connected to
your computer. If you want to install software for a network
scanner, see Chapter 5, "Network Scanning," instead.
Scanners and
icon in the Windows Control
EPSON GT-10000
button.
Properties
is selected,