Installing The Scanner Server Software For Windows 95 - Epson GT-10000 User Manual

Installing the Scanner Server Software for
Windows 95
Follow the instructions in this section to install your EPSON GT-10000 scanner
driver and other software on your scanner software CD-ROM. Before you begin,
make sure you recalibrate your monitor to factory specifications. (See your
manufacturer's documentation for instructions.)
To install your software on the client computers, see "Setting Up Client Computers"
on page 72 instead.
Installing the Scanner Driver
You may be asked to insert your Windows CD-ROM during this procedure.
Make sure you have your Windows CD-ROM available, or know where to find the
Windows source files on your hard drive. If you need help locating your source files,
contact your computer manufacturer.
1. Make sure your SCSI board and SCSI driver are installed and the scanner is
connected to your computer.
2. Turn on your scanner first, then turn
on your computer. When you see the
window on the right, click .
Next
Network Scanning
63